![]() ![]() Take A-469 on a cargo platform of any truck more than 200 metersīe towed to the garage machine type, located from the garage more than 150 metres. To complete any level in a Single game using only one machine To take long logs on the D-537 without using the brakes To take the average of the log-4320 not releasing the pedal 'gas' Go to local files tab and click open local folder. right click the game on the left hand side (menu) and choose properties. Go under water without stopping the engine It seems software do not complete to extract the updated 'Media' folder and also overwrite. To complete the level in standalone mode without using Map To get to the Sawmill logs on 20 points, while the logs are to be found outside of Logging Repair truck another player on 1000 points To fold and pack all overturned logs in for the nightįill in the Sawmill logs, supplying only 'Long logs'įill in the Sawmill logs, supplying only 'Short logs'įill in the Sawmill logs, running only in the truck B-130Įxplore all 'point of intelligence' only with a-469 at any level To complete the level without opening 'Points intelligence' Unlock all Garages at the level of the VolcanoĪfter 300 metres on a computer with enabled Parking brake, not including differential lockĬompletely to break a brand new car A-469 with a truck E-7310 To complete the level Volcano in online mode with at least one partnerĮxplore all 'point of intelligence' on the level of the Volcano To complete the level Volcano in Simulator mode Unlock all Garages at the level of the river is Wide To complete the Wide river in online mode with at least one partnerĮxplore all 'point of intelligence' in the Wide river To complete the Wide river in Simulator mode To complete the level Plain in online mode with at least one partnerĮxplore all 'point of intelligence' in level Plains To complete the level Plain in the Simulator mode ![]() Unlock all garages at the level of the Hill To complete the level the Hill online with at least one partnerĮxplore all 'point of intelligence' on the level of the Hill To complete the level of the Hill mode Simulator To complete the level the Coast in online mode with at least one partnerĮxplore all 'point of intelligence' on the level of the Coast To complete the level the Coast in the Simulator mode There are many of them and will last for many hours exploring the world Spin Tires. Therefore, we consider the currently existing achievements. Sounds even too good? You will never know unless you experience it yourself.As you probably already know many of the games that are sold on Steam have a set of achievements to reward the player for performing certain actions in the game. Become a leading player and accomplish goals that you even weren’t dreaming about. Don’t stay at the back of the line and surprise all your opponents. It’s about time to start playing smart and using all available choices. If it sounds great, don’t wait a second anymore, this is a perfect chance to get the significant benefit against your competitors without spending much time or money. Completing Spintires: China Adventure DLC Mod download is very simple and quick, so there won’t be any difficulties. If you find yourself in the situation where you have no escape, take a look at our suggested files and pick the needed upgrade. This is the reason, why Spintires: China Adventure DLC Mod free files are so popular all over the world – they assist a player and make everything solvable. ![]() If you cannot move forward and it seems that you’ve tried everything, Spintires: MudRunner Mod might offer you unseen features which will make you overcome all kinds of obstacles. Each Spintires: China Adventure DLC Mod is designed to solve particular problems and help to boost your chances to overcome boundaries. So, let’s begin: Spintires: China Adventure DLC Mods are additional files, which expand your options and provide you with new possibilities.
0 Comments
![]() In a C#, environment, the translation between the two formats is easy. It's not quite that simple, though Dynamo and Clipper think about Polygons differently, and we don't have the freedom we need in the Dynamo interface to make up for that. Dynamo allows users to use custom C# libraries and use them in Dynamo, so you might think that we could just import Clipper and move on. Thankfully, there is a library called Clipper which can be used from a C++ or C# program to do offsetting. Dynamo doesn't do this by default, and it's a bit too complex to do ourselves in this tutorial. This means we have to implement a process called polygon offsetting. We need an outer wall which has one edge on the boundary, and maybe more walls inside of that. Since we don't want just one wall centered on the part boundary, we can't just use the Polygons from the last step. Now that we have the outside of the part on each layer, we can work on building the part walls. Double-check that MinPoint.Z is indeed 0, and adjust if necessary. If you didn't, the code in this step might leave you printing in midair, or otherwise crash your print nozzle into the bed. WARNING: In the last step, you ought to have moved the mesh so that the bottom of the mesh was at Z = 0. By using the MinPoint and MaxPoint of this bounding box, we can find the top and bottom of the mesh, and use those in our code. To figure out the top and bottom of the mesh, we first grab the list of triangles in the mesh with Mesh.Triangles, then create a Polysurface container to hold them all, and finally compute the bounding box around the Polysurface (which is exactly around the mesh). " which goes up to but not past "end." In this case, we need to start at one layer height above the bed, then go up one layer height at a time, but not past the top of the mesh. ![]() This feature has the format "", and makes the list of numbers "start, start + step, start + 2*step. For the Z coordinate, we use Dynamo's built-in "range" feature. The X and Y coordinates don't matter, so we can just set both of them to zero. This node requires XYZ coordinates to construct a point. We create a Point.B圜oordinates node for the origins of our planes. Since all of our planes are parallel to the build platform, we can just use the Z axis vector for each plane's normal. For this node, we need an "origin" point for each plane to pass through, as well as a "normal" vector perpendicular to the plane. To build the plane for each layer, we will use the Plane.ByOriginNormal node. If you select an STL file in the File Path node, you should see your design appear in the viewer. For this, we make a File Path node and connect it to a Mesh.ImportFile node. We also have to import our file to slice. However, you can get much fancier with sliders under the Core > Input menu. In Dynamo, the easiest way to do this is to double-click and create a code block with all the settings. Output File Name: the name of the final file of printing instructions (G-Code).Print Temperature: how hot the nozzle needs to be, in Celsius.Print Speed: how fast to move while printing, in mm/minute.Filament Diameter: the width of the filament we're using.We also need a few more settings for later parts of the process: Extrusion Width: how wide to make an individual wall of the part.Number of Perimeters: the number of solid shells on the outside of our part.Layer Height: the spacing between our two-dimensional layers.At the absolute simplest, we need four options to plan our paths: That way, it's easy for me to adjust the settings of my code without hunting through the entire file. In general, this tutorial will be pretty organic in the way we build our code, but I like to keep all of my "tweakables" at the far left of the canvas. In this guide, we'll take a look at how slicers work, identify the most important features for us to replicate, and build a complete slicer that's capable of making real 3D printed parts. This inspired me to write this guide so that even novice or inexperienced coders can understand the code at the core of 3D printing. I had to struggle through the code of one of the open-source slicers, and it was slow, frustrating work. When I transitioned from a 3D printing user to a developer of 3D printing software, there was very little information available to understand how slicers work. All of these slicers have dozens of features for customizing the results, but many users don't understand the internal workings of the programs themselves. Many of the existing slicers (slic3r, Cura, MatterSlice, etc.) are open source, though a few closed-source slicers exist (e.g. ![]() This program takes in a 3D model and puts out the instructions for the printer itself. At the core of 3D printing is a piece of software called the slicer. ![]() In Cube 2: Hypercube, you can see some little bits of revealing information when the characters are talking about themselves and their past but it's really nothing conclusive. McKay in Stargate: Atlantis), an amazing actor and brilliant Tweeter.Īs for theories surrounding the creation and purpose of the movies, I've always liked that the answers were really obscure. In fact, Cube was the movie that introduced me to David Hewlett (who went on to play Dr. The Cube movies are like that, so I hope they keep going and people keep adding their own ideas to it all. If anything they remind me of Doctor Who in that sense - LOADS of your favourite writers have written for Doctor Who at some point and pulled it all over the place, it's just a fertile creative space. They're sort of sustainably bad, they don't seem to cost a lot to make and they drift slightly in interesting directions. I like the Cube movies in part because they're bad. I don't think it's just symbolism, I feel like the cube was a scary idea which they're slowly building a universe around, rather than there being any plan at the start. ![]() Probably the tech could be used to build wonderful things but the military being the military, the best thing they could come up with was building a giant torture device.Īs for symbolism, all movies are symbolism really. I've always kind of hoped that they would turn out not to be the centre of the puzzle, but to be there almost by accident, like a by-product of something else. Why the people are left in the rooms I don't know. That's to say they're trying to figure out the tech, not the cube itself, which they built with the tech. I feel, really, like it's alien technology (or possibly some kind of future/parallel universe tech, you know what I mean) which the military have obtained by semi-nefarious means and are trying to figure out. However it's pretty obvious that the technology involved is not only frighteningly advanced for the viewer, but for those left inside the cubes too. To the best of my recollection there's never been a scene where there's anything in a room that doesn't make sense from a human perspective. The traps are designed for humans and the dimensions of the rooms are too. My notebook () wrote:“The only dangerous amount of tea is none.I think the military made the cubes using unfamilar tech. ![]() If that's a cheap and easy way to get follows, then go for it. Za-Chary wrote:There are some people who, if they have a question… and you answer them, they'll just follow you. JesseTyler65 wrote:My browser / operating system: Windows NT 10.0, Chrome 106.0.0.0, No Flash version detectedMy browser / operating system: Ubuntu Linux, Firefox 108.0, No Flash version detected i am superiourr!!! (i am totaly not writing this on my old laptop that is trash and use windows 10 on my main pc)My browser / operating system: ChromeOS 14541.0.0, Chrome 108.0.0.0, No Flash version detectedMy browser / operating system: Linux, Firefox 108.0, No Flash version detectedMy browser / operating system: Windows NT 10.0, Chrome 108.0.0.0, No Flash version detectedMy browser / operating system: Windows NT 10.0, Firefox 104.0, Flash 32.0 (release 0)My browser / operating system: Unknown OS, Unknown Browser, No Flash version detectedMy browser / operating system: Windows Server 2003 / XP 圆4, Firefox 68.0, No Flash version detected Wait 'til I downgrade to Windows 98-My browser / operating system: MacOS Macintosh X 10.15.7, Chrome 108.0.0.0, No Flash version detectedMy browser / operating system: Windows 93, Netscape 2.1.7, ActionScript 2.0My browser / operating system: Linux, Chrome 108.0.0.0, Rotom detected, No Flash version detectedMy browser / operating system: ChromeOS 15183.59.0, Chrome 108.0.0.0, Soup in RAM detected, No Flash version detectedįorum Helper / Forum Participator / Interested in artificial intelligence / Dave and Bambi fan / Enjoys writing stories and having fun / Official fan studio / Happy Pride Month! Inspirational quotes from inspirational Scratchers (and my notebook): ![]() As they wait their turn to be treated, Haemimont points out just how much of Stranded is running autonomously – smarter sims are running around repairing damage to the base’s electrical grid, while others have the grim task of resetting every gore-slick bear trap. Though the base’s defences take a knock, its occupants pull through the attack with a handful of minor injuries that require attention. That’s all thanks to Stranded‘s comprehensive tech tree, which means that if sims spend time learning about the resources available to them, they’ll eventually be able to turn them into a range of practical utilities – including hot air balloons, electricity generators and the turrets that are currently barrel-deep in extra-terrestrial gore. Their base – now a stronghold – is all fenced off, and the entrance is littered with bear traps and automated turrets. ![]() Related: Thankfully, you can help your new survivor colony persists through the year. With its steep learning curve and detailed mechanics, it takes plenty of time and several lost colonies to grasp. Hordes of these crawling aliens are now throwing themselves at our survivors, who have luckily made a few upgrades of their own. Stranded: Alien Dawn is an in-depth, sometimes unforgiving, survival sim. At first, it’s a simple case of our resident tough guy squashing a few angry bugs -until our next skip takes us much further into the future, and it’s all gone a bit Starship Troopers. While a few days to settle in has done our survivors some good, it’s also given the planet’s alien life time to find their settlement – and they’re not a fan of their new neighbours. Following a time-skip, the survivors now have a roof over their heads and while they’re still heating up their remaining emergency rations for food, they’re able to crack on with some more advanced concepts – researching everything the planet has to offer, and trying to farm some of its more exotic-looking fauna. Credit: Haemimont GamesĪs the survivors get to grips with their new home, some of these mechanics start to come into play. From the start, it’s clear that there are oceans of depth and micro-management for players to explore, yet Haemimont points out that the game’s more intricate mechanics can be set to work automatically. Stranded‘s sims have been given the perfect amount of agency: you can set someone away to prioritise doing what they’re best at – perhaps guarding from attackers, or patching up everyone’s scrapes – or set them manual tasks that need doing. Immediately after crash landing, players will need to crack on with pressing, basic concerns – chucking up ramshackle beds, working out what’s edible, and making sure their survivors are fit to pitch in. In a hands-off preview at Gamescom, developer Haemimont demonstrated how all of this will play out across a longer playthrough by skipping time forwards. Besides having to feed, clothe and shelter your motley crew, there’s also some very angry alien life that’s keen to finish the job your naff ship’s engines started. READ MORE: The 8 best PC games you need to play in 2022įar from Earth, that’s no mean feat.A survival simulator set immediately after a crash landing on an alien planet, players are tasked with keeping their ship’s remaining passengers alive at all costs. In Stranded: Alien Dawn, you’ve got your work set out for you. Simply copy and paste your songs into Flow and it detects the key, tempo and “Energy Level.” You can analyze your songs in batch, by folders and even by iTunes playlists. As soon as you launch the software you’ll see a screen with three sections: Preparation, Play and Export, which are the three main functions. It’s pretty straightforward and you can easily find you way around. There’s no demo version and you can’t test it without paying for it - a real pity. It's a very tired argument that all of Apple customers love everything the company does.Right from the start you have to enter a “VIP Code” to prove that you have purchased the software. Go visit a place like Macrumors, and you will find a lot of Apple customers who have the same stance. Things like the Mac mini are small and use little power, but it would be an even better product if they made higher base configs than a paltry 8GB/256GB. I agree that their current hardware path has closed the door on repairability and even more importantly, upgradability. I don't insult you for your buying choices, so why are you insulting me for mine? Are you actually trying to make a convincing argument, or do you just want to feel good about yourselves? Last I checked, Microsoft obsoleted a crap-ton of perfectly good hardware with Windows 11, but we don't believe that everyone who buys a Windows machine loves everything Microsoft does, do we? None of these companies care like we think they do. It's an arrogant and inflammatory statement, and you're simply doubling down on it. ![]() The original premise was that anyone who uses an Apple product doesn't care about the environment or repairability. But sand, as we all know, is rough, irritating, and it gets everywhere-so let's see just how repairable the MacBook Air 15" truly is." ![]() No butterfly keyboard, extra speakers, huge trackpad, and all-day battery life-plus speedy charging with a 65 W adapter-and you're ready for a day at the beach. ![]() IFixit's video description states: "The M2 MacBook Air has grown up and has a 15" summer bod to show off, with a hefty 22% more bulk, 26% more pixels, and a mere 0.2 mm increase in thickness. iFixit awarded a repairability score of 3 (out of 10) to the Apple M2 MacBook Air 15-inch model, and concluded that this premium laptop is "a heavy unrepairable beast (hidden) under (its) skin deep beauty." These positives aspects are almost entirely negated by overcomplicated preceding steps. The 66.5 WH-rated battery only becomes accessible at the tail end of a truly frustrating teardown process, although the reviewer notes that it was very easy to remove the cell assembly-only having to deal with "neato" pull tabs and clip-securing posts. The team had to contend with plenty of connector brackets, ports, pentalobe + miscellaneous screws types and covers adding to their collective headache. ![]() Things turn sour almost immediately upon starting disassembly-iFixit described their experience of disconnecting the internal battery as "miserable," and added that it was even more of a challenge to extract the laptop's logic board due to the force-canceling speakers/woofers getting in the way. Initial impressions are good thanks to more screen real estate, increased pixel density, large trackpad, a six-speaker sound system and smart battery tech. The test unit has an A2941 model number and looks not too far removed from the 13-inch equivalent externally and internally, but the fifteen-incher is 22% heavier. This 15-inch screen variant was announced at WWDC 2023 and was released to retail soon after. IFixit has released their teardown and evaluation video covering Apple's brand new M2 MacBook Air model. ![]() I understand sometimes the hesitancy around how resources are used to ensure the purpose for which those resources were raised,” Tufton told The Gleaner. “I want to say for the record that I respect and admire the efforts of Shaggy and his team for advocating for, and putting on, the fundraising event which they did. However, he acknowledged that such collaborations were sometimes hampered by mistrust over whether donations would be channelled towards intended purposes. Tufton cited Nichols’ donation as proof that public-private partnerships are feasible and desirable. The CHASE Fund, National Health Fund, Ministry of Health & Wellness, and the American Friends of Jamaica also funded the rehabilitation. Tufton praised the US$1-million donation from philanthropist Beverly Nichols that co-financed the J$309-million renovation of Chapelton Community Hospital in Clarendon. I don’t know what other information you got, but that’s what it is,” Packer told The Gleaner last Thursday, referencing Benjamin’s remarks. We are continuing with that mandate and that’s what is happening. All I know is we are moving forward with what was promised, which was five ICU beds. Packer has doubled down on her insistence that the funds would exclusively go to the project for which it was initially earmarked. Section 30 of the legislation bars charitable organisations from diverting donations made for specific causes to other purposes. Packer emphasised – months ago and again last week – that redirecting the funds to another cause would contravene the provisions of the Charity Act. Hospital officials could give no timeline on delivery. She (Rebecca) said she’d have to go back to them and amend it, and it’s a couple years now, and nothing has happened.”Ĭorrespondence from a recent meeting between the hospital and the foundation suggests that there may be a tweaked plan to “procure medical equipment” for the ICU as well as to “reconfigure the existing space from five to seven beds, with two for the isolation of infectious cases”. “They were supposed to go and get amendments done to that relief of taxes that was specifically for those units. We said we don’t need the intensive care beds anymore, could we use it for other purposes at Bustamante?” said Benjamin. And he said for them to change that, you have to go and reapply. For worthy causes, you can apply to them and get it stated that it’s for a good cause. He (Shaggy) said he had applied to the institution that gives you duty free. “There was a need for five intensive care beds at Bustamante, so unfortunately or fortunately, they put up a new wing which was the cardiac wing where children have heart surgery, so they had, in it, five or six extra intensive care beds. He told The Gleaner that a cardiac ward – outfitted with five ICUs – was built at the hospital through a partnership with the Heart Foundation and other stakeholders after the SMADF commitment.īenjamin said he had informed the foundation that the need for ICUs was no longer urgent and that funds could instead be rechannelled towards to the construction of a new facility to house parents waiting for their children to get treatment. “I am disappointed it’s taking so long,” said Benjamin, adding that the funds could go to several other worthy causes at the children’s hospital.īenjamin said that he made a request for funds to be redeployed to purchase equipment for proposed new wards. Sign up for The Gleaner’s morning and evening newsletters.īenjamin told The Gleaner that he, too, was disheartened at the delay. ![]() The men’s fall season begins this weekend at the MTSU Fall Invitational while the women will start play at Furman University on the last weekend of September. 11 in the nation, while the duo of Schmandt and junior Annie Menees have garnered the No. Tsoubanos, an all-american in doubles last season with 2003 graduate Sarah Riske, will team up with Falk this season. The returnees are joined by 2003 ITA Summer Circuit Player of the Year Amanda Fish. Seniors Aleke Tsoubanos (50th) and Kelly Schmandt (58th), junior Audra Falk (91th) and sophomore Ashley Schellhas (85th) all enter the fall schedule among the ranks of the nation’s elite. Chicago 3 Ontario Cincinnati Pacific Northwest Cleveland Philadelphia Connecticut. The duo posted a 15-4 mark last season en route to an appearance in the NCAA Doubles Tournament.įor the women, four student-athletes find themselves in the ITA’s top 100. In doubles, Harris and Brown will team up as the eighth-ranked team in the country. Junior Scott Brown rounds out the ranked Commodores at No. 35, junior Matt Lockin is Vanderbilt’s second top 40 player. Harris became Vanderbilt’s third all-american a season ago while helping to lead the Commodores to the NCAA Finals. Thomas Sidney Tad Smith, Jr., the former president and CEO of Sotheby’s, bought a newly built Palm Beach home for 7.7 million. 6 in the country, the highest pre-season ranking ever achieved by a Commodore men’s tennis player. Former Sotheby’s CEO buys Palm Beach home for 8M. ![]() Beginning in October 2020, Tad served as a member of the board of Capitol Investment Corp V, and stepped down in July 2021 after the successful merger with real estate tech company, DOMA. On the men’s side, senior Chad Harris enters the fall season ranked No. Tad Smith was appointed Chief Executive Officer and Director of TheKey (formerly Home Care Assistance) in November 2020. The two squads combined to post eight athletes in the nation’s top 100. The Vanderbilt men’s and women’s tennis teams are again well represented in their respective pre-season rankings, released this week by the Intercollegiate Tennis Association. Vanderbilt Tennis Players Garner Pre-Season Attention NCAA Guide for the College-Bound Student-Athlete ![]() Prospective student-athlete questionnaire Student-athlete mental health and performance Vanderbilt University Athletics - Official Athletics Website Open Menu ![]() ![]() There's supposed to be a Subrosasoft launcher that comes up first if this concept worked but it never does. ![]() When I click to select the device the mouse locks up and the Mac restarts. Holding the Option key to restart, the USB drive shows up only as a storage device. When I looked at the USB drive contents everything appeared to me as a bootable drive would but it just did not show up as a bootable drive when holding the Option key on my iMac running 10.0.6. I could not - after more than 12 attempts - get this software to create a bootable DiskWarrior or TechTool Pro USB drive. * Note - Users of DasBoot must have purchased licenses to install the various disk utilities and own an appropriate disk utility bootable CD/DVD to use as the source disk.ĭasBoot is free to download and can be freely distributed.ĭasboot will create a bootable USB version of the Snow Leopard installer disk, FWIW, but that's all. In doing so it will effect the operation of non-forensics based tools in order to stop them altering your evidence.ĭasBoot has been tested with the following disk utilities and data recovery tools, but will also run many others Cop圜atX, FileSalvage, MacForensicsLab, VolumeWorks, Drive Genius, Data Rescue II, DiskWarrior, Apple Disk Utility, and TechTool Pro. This boot CD is specifically modified for forensics use in that it disables the portions of the operating system that can effect your investigation. If you want a forensically sound boot device then please use the MacForensicsLab boot CD. SubRosaSoft DasBoot™ gives you the power to create and maintain your own pocket-sized toolkit for your Mac - exactly the way you want - on one portable device and it's totally free!! Just plug it in and all your tools will be at your fingertips. But unlike expensive third party alternatives, you'll have plenty of space left over for a multitude of additional utilities as well as ample drive space when you need to recover data.ĭasBoot™ allows you to run data recovery applications such as FileSalvage, diagnostic and repair applications, and much more, all from your MP3 player, portable hard drive or flash drive. With the help of DasBoot™ you get to carry all the tools you'll need in your shirt pocket. You can use your portable music player to boot, check, maintain, and repair Mac OS X computers* as needed without erasing it and taking away your ability to play music or use your device as you always have. DasBoot allows you to take any third party boot CD (such as those shipped by Inc, Prosoft Engineering Inc, Alsoft Inc, or Micromat Inc) and quickly create a bootable diagnostic device that contains any of your own utilities that you may wish to install. DasBoot allows you to use iPod, flash drive, portable HD as bootable diagnostic device.ĭo you have a nice new portable music player in your pocket? Or perhaps a flash drive or portable hard drive? Why not turn it into a Mac OS X diagnostic, repair, recovery, and maintenance tool? With SubRosaSoft DasBoot™ it's easy. ![]() The spacious, open environment creates a pleasant dining atmosphere while the remarkably extensive menu has enough options to ensure everyone in your party will discover their perfect dish.” – CBS Local This eatery offers far more than traditional dumpling fare, but they do have those fun Dim Sum food carts and a wonderful spread of authentic items that are sure to please even the most discerning palates. “Ocean City Restaurant is an unassuming establishment located across from a parking lot on 9th Street. You pick and choose what you want and the prices are reasonable.” – Philadelphia RowHome Magazine Loaded with dumplings, meats, seafood, buns, noodle dishes, vegetables, and even desserts, each plate easily contains enough food to share between two or three people. The carts, some of which are heated to keep certain foods nice and warm, are filled with a variety of small dishes. “Once you’re seated, a steady flow of shiny stainless steel food carts continually circulate throughout the dining room and pass by your table. With multiple rooms, the Imperial Inn is great for groups and even if there‘s a line at the door, the wait is never long.” – Examiner Dim Sum is a social meal, meant to bring friends and family together and the larger the group, the more opportunity to try many different dishes. “Imperial Inn is a beautiful though outdated, wood-paneled restaurant with large paintings and fish tanks. “Known as much for its neon-lit windows as its soup dumplings (which have been known to make more than one area food critic a little weak in the knees), Dim Sum Garden serves up Shanghai-style favorites from house-made noodles to addictive scallion pancakes in a simple, albeit difficult-to-find spot.” – Haute Living Hole in the Wall - the food’s the only reason to go, and that’s a good thing. Modern - fusion or innovative takes on dim sum classics. Elevated - exceptional views or ambiance create a more refined dining experience. Restaurant Key: Classic - big and boisterous, the full dim sum hall experience. Where To Find The Best Dim Sum in Philadelphia Read on! Here are the five best dim sum restaurants to try in Philadelphia, listed in alphabetical order and shown on a map to help you find them. Putting authenticity aside, this kitchen produces interesting creations like pan-fried pastrami-and-Swiss bao and XO-slathered chicken wings. Though not at all what you’d expect from a classic dim sum restaurant, Bing Bing Dim Sum (1648 E Passyunk Avenue, Philadelphia, PA) deserves honorable mention. Otherwise, it’s more akin to a regular Chinese restaurant with a few dim sum dishes on its menu. Though it carries the words dim sum in its name, Dim Sum Garden is primarily known for its soup dumplings and other northern-style small plates. Imperial Inn receives a few more higher marks for its food, while Joy Tsin Lau provides a less manic experience in a smaller space. Tables are packed closely together, the decor is delightfully low-key and service is rushed. ![]() Food quality varies from meal to meal, though diners consistently enjoy the raucous environment they’ve come to expect from what’s dutifully reviewed by local weeklies as the “Chinese brunch.” In Philadelphia, you come for the experience and a table full of dim sum staples to share with friends.Įach of Ocean City, Ocean Harbor, Imperial Inn and Joy Tsin Lau are excellent choices for a familiar dim sum meal. Philadelphia’s best dim sum is found in the same types of classic Cantonese food halls that populate New York and Boston to the north. » Read more: Our Ultimate Dim Sum Menu Guide with Pictures and Translations ![]() Today, Philadelphia’s Chinatown acts as a sort of regional hub for the 250,000 Chinese Americans living throughout nearby Delaware, New Jersey and Pennsylvania. The fortunes of Philadelphia’s Chinatown rose and fell with local employment opportunities through the Chinese Exclusion period. Philadelphia’s Chinatown has been located in the same set of downtown cross streets between Vine and Arch, since it was established with its first restaurants and laundries during the 1870s. Unsurprisingly, the city’s classic and traditional dim sum scene provides many opportunities for foodies to find their favorites, but would benefit from a fresh infusion of new ideas. Along with Boston and New York, Philadelphia is part of the trifecta of “old school” Chinatowns in the northeastern United States. ![]() By rethinking these concepts from fresh perspectives, the collection challenges scholars to consider how a wide range of academic, aesthetic, and social phenomena might be productively thought through using the overlapping lenses of transmedia, seriality, and narrativity. This special issue opens a conversation on the intersection of these three concepts and their implications for a variety of disciplines, artistic practices, and philosophies. The dispersion of potential story elements across a diverse collection of media platforms and technologies prompts questions concerning the function of seriality in the absence of fixed instalments, the meaning of narrative when plot is largely a personal construction of each audience member, and the nature of storytelling in the absence of a unifying author, or when authorship itself takes on a serial character. Yet, the precise connections between transmedia networks, serial structures, and narrative processes often remain underdeveloped. The concept of transmedia storyworlds unfolding across complex serial narrative structures has become increasingly important to the study of modern media industries and audience communities. Thus, this chapter explores the ways the music industry can generate cultural and economic value through transmedia projects, and seek to assess the role of music in the diverse transmedia storyworlds that these projects generate. ![]() However, the music industry too has embraced not only cross-media distribution principles, but also world-building and transmedia storytelling models, mixing and remediating itself with other media languages in order to produce narratives and experiences that are centered on music. This is most evident in franchises based on audiovisual products, where the characters, along with the storytelling they generate, are the foundation of a transmedia storyworld. In the meantime, industrial and cultural convergence has opened up new creative and commercial possibilities, allowing single industries to become part of larger networks of synergies that can create value from multiple businesses, outlets and audiences by spreading one core idea, or concept, across different media. Utilizing this framework can help K-Pop groups elevate their brands, better use storytelling elements, and gain larger, more engaged audiences.įaced with the technological, economic and cultural evolutions of the entertainment world, the music industry has to engage with new business models and consumption habits-suffice it to consider the drop in album sales and the rise of subscription streaming services, such as Spotify. The analysis resulted in a proposed framework that suggests the following components: 1) story as central to the brand 2) authenticity and sincerity 3) idol participation in creative output 4) use of transmedia storytelling and story gaps 5) intertextuality and cohesion 6) opportunities for audience engagement and 7) dedicated creative staff. ![]() The importance of transmedia storytelling and participatory audiences is also examined. To investigate BTS’s storytelling strategies, this article breaks down how stories permeate BTS’s content, from music and videos to the Bangtan Universe and documentary films. ![]() With their consistent and creative reliance on story, BTS has transformed the K-Pop landscape, providing a framework for others in the industry that relies on open-structure narratives, sincerity, and active audience engagement, among other components. Modern brands know that story is no longer an option, but a requirement for keeping audiences engaged. Good storytelling is at the heart of BTS as both a brand and a band. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |